1、网络拓扑
2、ER路由器eth0口地址：192.168.100.254ES交换机vlan1和路由器相连配置交换机的DHCP服务新建个vlan10interface vlan 10routingip address 192.168.10.1 255.255.255.0service dhcpip dhcp pool "10"default-router 192.168.10.1network 192.168.10.0 255.255.255.0将本地的network设置为none(UBNT EdgeSwitch) #network parms none配置interface vlan1的地址interface vlan 1routingip address 192.168.100.1 255.255.255.0
3、设置静态路由ip route 0.0.0.0 0.0.0.0 192.168.100.254配置ER路由器静态 路由，指向到192.168.10.0网段的路由
4、在交换机上面接入一台机器，将接口划到vlan10interface 0/24vlan pvid 10vlan particip锾攒揉敫ation include 10这样电脑可以获取到vlan10的地址，并且可以访问互联网了
5、电脑ping值
